TEL: +86-769-82585993 Email:


Contact Us

Add:Room B106, Bldg. B, Jinguo Business Center, No.1, Shangxin Road, Xin'an Community, Chang'an Town, Dongguan, Guangdong, China (Mainland)
Contact person: Mr. Gary Lee
Home > News > Content

Stainless Steel Jewelry More And More Applications

Stainless Steel jewelry When making a selection, it is important to determine if there are local factors that affect the use of the site environment. For example, stainless steel used in the factory chimney below, used in the air conditioning exhaust baffle near or near the scrap steel field, there will be non-general conditions.Maintenance and cleaningAs with other materials exposed to the atmosphere, stainless steel is also dirty. Future lectures will analyze the design factors that affect maintenance and cleanup costs. However, there is a relationship between rain erosion, manual flushing and dirty surfaces.

    The effect of rainwater scuffing was determined by placing the same slats in the atmosphere directly and on the shelter. The effect of manual flushing is determined by manually scrubbing the right side of each slab every six months with a sponge stained with soapy water. It was found that dust and siltation on the surface by rainwater scrubbing and manual scrubbing had a good effect on the surface condition compared to the slats placed in the shed and not washed. But also found that the surface processing of the situation also has an impact on the surface of the slab than the surface of the rough effect is better.

    So the interval between the scrubbing by a variety of factors, the main factor is the required aesthetic standards. Although many stainless steel curtain walls are only flushed when wiping the glass, in general, the stainless steel used for external scrubbing twice a year.

Typical useMost of the use requirements are long-term to maintain the original appearance of the building. In determining the type of stainless steel to be selected, the main consideration is the required aesthetic standards, the corrosiveness of the atmosphere and the clean-up system to be used.

Stainless Steel jewelry However, other applications are increasingly seeking structural integrity or impermeability. For example, the roof and side walls of industrial buildings. In these applications, the owner of the construction costs may be more important than the aesthetic, the surface is not very clean can.

    In the dry indoor environment using 430 stainless steel effect is quite good. However, in rural areas and cities in order to keep its appearance outdoors, you need to regularly clean. In heavily polluted industrial areas and coastal areas, the surface will be very dirty, and even rust. But to get the aesthetic effect of outdoor environment, you need to use nickel-containing stainless steel. Therefore, 304 stainless steel is widely used in curtain walls, side walls, roofs and other construction purposes, but in the serious erosion of industrial or marine atmosphere, the best use of 316 stainless steel.

 Stainless Steel jewelry Now, people have fully realized the advantages of using stainless steel in structural applications. Several design guidelines include 304 and 316 stainless steel. Because the "two-phase" stainless steel 2205 has a good resistance to atmospheric corrosion and high tensile strength and elastic strength of the integration, so the European guidelines also include this steel.

Also use plate to produce special products, for example, to produce hot rolled steel and extruded structural steels. But also round, oval, square, rectangular and hexagonal welded pipe or seamless steel pipe and other forms of products, including profiles, bars, wire and castings.

    Surface conditions As will be discussed later, in order to meet the aesthetic requirements of architects, has developed a variety of different commercial surface processing. For example, the surface may be highly reflective or dull; it may be glossy, polished or embossed; it may be colored, colored, electroplated or etched on a stainless steel surface to meet the designer's appearance The various requirements.

Stainless Steel jewelry It is easy to keep the surface state. You can remove dust by occasional rinsing. Due to good corrosion resistance, it is also possible to easily remove surface contamination or other similar surface contamination.

Dongguan Impressive Jewellery Co.,Ltd